Hf-scientific Micro100 Laboratory Turbidimeter Manuel d'utilisateur télécharger pdf (Page 9)

Micro 100 (5/10) Page 3

Rev. 3.3

3.0 Becoming Familiar with the Instrument

Figure 1 is a depiction of the front of the MICRO 100. Not shown in this picture are the RS-232 serial

printer port and the 12V DC power plug connector, which are located on the back panel of the

instrument.

The user interface of the MICRO 100 has been designed with a 5 key touchpad and user display. The

five keys of the Touch Pad and their functionality are described below:

The

key is used to turn the instrument on and off. The key is used to enter, or exit,

calibration mode. The and are used to set numerical values and to scroll through lists.

The key stores value on the screen and/or causes the turbidity data to be output to the printer port

when pressed.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 20 21

Pas de commentaire

Hf-scientific Micro100 Laboratory Turbidimeter Manuel d'utilisateur Page 9